Find info on your childrens health

The Childrens Health Blog

Subscribe to Find info on your childrens health

So, up to this point, your dog or cat has been your baby, but now theres a little human on the way. It is normal and, in fact, wise to be concerned about how the two are going to mix. The chances are very good that everything will work quite well and your pet and your child will be very close buddies, but there are some things you can do to be prepared. First some tips for dogs:

Teach your dog to stay out of the nursery
Start right away putting up a baby gate or keeping the door closed to help your dog learn to stay out of the babys room. Later on, you can allow the dog in the room, especially if you are in there, but its best to prepare him at first to stay away.

Introduce your dog to some other babies
If hes never been around a baby, carefully introduce some into his life. He is much less likely to be anxious around your baby if he is introduced gradually.

Make sure he is well trained
A babys behavior is not predictable, so your dog has to be the grown up in this case. If your dog does not obey you, its time for some training before the baby arrives. If your dog is a male, and you havent had him neutered, this is a good time for that, too. It should make the dog calmer and more well mannered.

Then, theres the cat some of the same ideas work for cats, too, except that training them to stay out of a room is pretty difficult. They scale baby gates, and cribs, by the way with ease. So, in addition to a baby gate, its wise to purchase a net to go over the crib, to keep the cat out. Also, if your cat sleeps with you, dont put the baby in your bed with the cat in the room.

For both types of pets, keep the food and water bowl away from the baby. Babies love to play in them, and this can not only make a mess, but can cause the animal to be even more jealous. Also, at some point, if your child can get to the pet food, he will try to eat it. I promise.

Your child and your pets should develop a good relationship with little trouble. Just be diligent for a while until everybody is comfortable, and you should continue to have a happy home.

Tags: , , , , , , , , , , , , , , , , , , ,

Related posts

Baby Dream Crib – Sweet Dreams In Baby’s Dream Crib Collection

A Baby Dream Crib, with adorable bedding and accessories to match, is one way of ensuring a comfortable, nurturing nursery. With more than 15 years experience behind it, the company is committed to continue the tradition of quality craftsmanship, as seen in every Baby Dream Crib. Located in Buena Vista, Georgia, the Baby’s Dream Crib manufacturer is an integral part of the community.

The Baby Dream Crib collection is versatile, with cribs manufactured to accommodate conversion to a toddler bed later on. With the addition of optional rails, the crib even becomes a full-size bed. The superbly adjustable mattress heights maximize functionality of these cribs.

The Generation Next, with classic sleigh bed lines, is one range in the Baby Dream Crib Collection. A convenient drop-gate front allows you to reach your little one with ease. Beautiful decorative feet have dowel reinforcements, adding to the robustness of the crib.

The Generation Next Baby Dream Crib meets safety standards as set out by the CPSC. A selection of furniture pieces, such as Drawer Chests and mirrors, complement the crib. Finishes are available in a variety of colors, such as amber, cherry, honey, and white.

A Baby Dream Crib with an elegant touch, is featured in the Georgian line. Lenga wood, with exquisite detail in the design, adds to the beauty of this range. A safety feature is that both latches of the drop-gate front has to be engaged or loosened simultaneously. At the same time, the design also prevents little fingers from getting pinched. Non-toxic cherry-colored finishes rounds off the picture.

The Kathryn Crib is a Baby Dream Crib in the sleigh style. The delicate, soft curves of this cozy crib converts into a full-size bed that will enhance any teenager’s room. A choice of additional pieces, such as the Belle 6-Drawer Chest, adds stylish storage space.

In the tradition of Baby Dream Cribs, a crib in the ebony finish of the Infinity line, will grow with your baby. This range is suitable for a boy or a girl, and has a number of options as far as add-on pieces are concerned. An Infinity Grand Armoire, or Double Dresser, are only two examples.

Your baby will love naps and nights in his or her comfy Baby Dream Crib…

Tags: , , , , , , , , , , , , , , , , , , ,

Related posts

Dec
07

Baby Cribs Safety Checklist

Posted by admin

Congratulations! Youve got a baby on the way!
Once your baby has arrived, one of the most important parts of your new life together will be getting a good nights sleep you in your bed, the baby in a safe and comfortable crib. At first, you may want your newborn to sleep in a bassinet by your bed, making it a little easier for breastfeeding moms, but have a crib ready by the time your baby can roll over.

Your baby will spend more time in the crib than anywhere else, so safety is of utmost importance. What makes a crib safe?

* The bars or slats of the crib railing should be no more than 2-3/8″ apart, close enough together to prevent your babys head from slipping through or getting stuck. That crib in the attic may be a beautiful antique, but it probably does not meet this safety standard. Secondhand older cribs may also have splinters or lead paint as well as slats that are too far apart.

* Cribs with cutout designs along the rail may look pretty, but your babys arm or neck could get stuck in them.

* The crib must be sturdy. Your child will sleep in a crib until its time to move into a regular bed between the ages of 2 and 3. When shopping for the crib, give it a good shake to see if it wobbles or rattles.

* Construction materials should be stained or painted hardwoods like maple, ash, beech or oak. The use of inferior woods can potentially weaken or warp the slats. Some metal cribs are also very sturdy and secure. All finish materials must be lead free and non-toxic.

* For safety, the dropsides must be at least 9″ above the mattress support when lowered. When the side is raised, the top must be at least 26″ above the support at its lowest position. You should have no trouble quietly raising and lowering the side rail easily with one hand, since chances are youll have a sleeping baby in your arms.

* Make things a little easier on your back by choosing a crib with an adjustable height mattress. A newborn can rest higher in the crib, while a baby who can sit up needs a lower mattress so he cant climb out. You can change the height of most mattresses by simply raising or lowering the mattress support.

* Check the hardware on the crib for sharp edges or points or anything else that could hurt your baby.

* The mattress should fit snugly into the crib. If you can fit two fingers between the side of the mattress and the crib, it is too small. Keep an eye on foam mattresses; over time, they may break down at the edges and leave gaps. Check the mattress support to make sure there are safety clips that lock the hangers into their notches.

* Use nonflammable and hypoallergenic bumper padding attached to the inside railings of the crib to cushion all four sides and prevent your baby from sticking an arm or leg through the railings. Securely fasten the bumper pads to the sides of the crib in at least six places. Be sure to remove bumper pads when your baby becomes more active.

* Follow assembly instructions carefully. Periodically tighten all nuts, bolts, and screws and check teething rails for cracks. Check the mattress support hooks regularly.

* Dont place a crib against a window, near curtains or drapery cords, or near furniture that could help your baby climb out.

* Crib toys need to be removed from the crib when baby is sleeping. And remove mobiles when baby is able to grab at objects.

Federal safety guidelines went into effect in 1973, but only since 1991 do most cribs meet all mandatory safety standards (16CFR part 1508) as set by The Consumer Products Safety Commission (CPSC) and the voluntary standards (ASTM F966 and F1169) as set by the American Society for Testing and Materials (ASTM). The Juvenile Products Manufacturers Association (JPMA) certifies cribs that meet the safety standards.

For more information on crib safety and other nursery equipment, contact the Consumer Products Safety Commission at 1-800-638-2772.

Tags: , , , , , , , , , , , , , , , , , , , ,

Related posts

It is a sad fact but one we have to come to grips with, not all baby cribs are safe. Baby cribs are supposed to keep your baby safe during sleep but did you know that when badly constructed or improperly assembled a baby crib can be a serious hazard to your child? No matter how expensive the baby crib is parents should use caution when choosing a crib for the nursery, and should follow instructions to the letter.

One of the biggest mistakes some people make is they “assume” that all cribs are safe, but whether you are using a brand new baby crib that you just bought a couple of months ago from a reputable store or recycling the one that you used for your older kids, or a second hand one from a garage sale it is important that you closely inspect the crib for hazardous possibilities as they may be lurking in places that you would not even consider remotely dangerous! Here are some tips that can help keep your child safe in a baby crib.

Close inspection
When buying a baby crib or when you are about to use one, make sure that everything is in place and there are no broken or bent parts. Sharp edges, missing joints and small removable parts in baby cribs can also be dangerous as they can be choking hazards.

Side edges and protrusions can also become strangulation hazards as blankets, necklaces and shirts can be caught. Never buy or use cribs that have these flaws.

Follow the instructions
Never believe that for one-minute you know everything about baby cribs just because you have used one before. And no matter how much knowledge you think you have, it is still imperative that you read the manual and instruction guide.

In addition to providing the step-by-step guide on how to set-up the baby crib from the box, the manual will also contain some tips on how to properly care for your crib and to avoid accidents while using it.

Non-toxic finishes
The baby cribs finish should be made with non-toxic materials that are recommended for young children. As babies body systems, especially the immune systems are still developing, it is important that they be protected from chemicals and toxins in the environment. When buying a used baby crib, make sure that the finish is sound and not flaking or peeling, also if it looks like it has been refinished you may want to find a different crib as it would be impossible to know for sure whether it was refinished with a child safe non-toxic material.

Drop sides
Though the dropside mechanism in baby cribs can be very convenient, it can also spell disaster if not working correctly or the latches are not secure. Be sure that when you do put your baby inside the crib, you have raised the drop side and the latches are secured. Some parents may remember to raise it up but forget to secure it, which can lead to accidents.

Keep the crib uncluttered
Remember that the more things inside the baby crib, the greater the chances of an accident, I’m sure you’re generally aware that anything can be a potential choking and strangulation hazard. To help avoid this, keep the baby crib to a bare minimum, only placing things that are absolutely necessary like a pillow and a blanket. Toys inside the crib are okay if your baby is awake and playing under supervision, but always remember to remove them when sleeping. Parents are also advised to avoid placing dangling toys on the side of the crib as loose straps may capture your baby and create a strangulation hazard.

Check for alerts and call-backs
The Consumer Product Safety Commission lists safety tips, alerts and call-back warnings on baby cribs on their website at www.cpsc.gov and should be followed.

Tags: , , , , , , , , , , , , , , , , , , ,

Related posts

Dec
04

Baby Cribs – Safety Is Key

Posted by admin

You have just learned that you are expecting a baby. Even if you have other children, you must take a look at cribs. Is the crib you already have an antique? You should look carefully at your second hand crib whether it is an antique or not.

The safety of your new baby makes this necessary. The screws and/or other fasteners such as bolts must be in place and not loose. It is of the utmost importance that this is tested before you place your baby in the crib.

Take something that is almost equal to your 4-month-old baby’s weight. In order to be certain that it will hold its position bounce it off the mattress. If it doesn’t your baby could be hurt seriously or worse. When you set up your nursery, if it isn’t set-up already, seriously consider where you will place your crib.

If you have to place the crib near a window with Venetian blinds, you can either shorten the cords or anchor them to prevent your baby from reaching and getting hold of them. Avoid, if possible placing the crib near the window. As your baby grows into a toddler and begins to climb out of the crib, s/he could become seriously injured in a fall.

Blankets are not necessarily a good idea to use with your baby. Be sure that you avoid anything that could put your baby at risk, especially in the light of SIDS incidents today. The most advisable way to put your baby to bed is in a blanket sleeper.

Make sure to tuck the blanket tightly around and under the foot of the mattress with you baby’s feet touching the footboard if you must have a blanket on your baby. You also want to help prevent your baby from sliding under the blanket and suffocating by not putting the blanket any higher than his chest.

There is a risk of your baby slipping between the mattress and the bumper pads causing suffocation, if bumper pads, which are a great concept, are not secured properly. Bumper pads if used should be fastened in each of the four corners and evenly spaced on each of the two sides. There should be sixteen ties in all, eight for the top and eight for the bottom.

Although mobiles are nice additions you need to take a precaution to prevent your baby from getting entangled in it. It must be removed when your baby starts sitting up by himself. You must also check to see if there are small parts that are removable that your baby could choke on.

No matter is your crib is second hand or one you had for a previous child, or you got it from someone else, the mattress must by checked out carefully. The mattress covering should be checked for any holes or cracks.

The mattress must fit in the crib properly. Your baby could slip between the mattress and side or end bars and suffocate if you are not careful. The mattress should be snug in the crib. The sheets you use in your baby crib should fit properly and not slip and slide.

There are sheet hooks available that attach to the sheet under the mattress and keep it in place. Placing the mattress in the proper position is extremely important to your baby’s safety. When the baby comes home most parents put the mattress in the highest position because it is easier to reach the baby and change him.

Lower the mattress according to the growth and activity of your baby. If your baby can come to a standing position in the crib the mattress should be put in the lowest position and to add to his safety you should measure the distance between the mattress and the top of the sidebar.

There should be no more than 26 inches from the top of the side bar to the mattress when it is in the lowest position. Moving your child to a regular bed might be a good idea if your child is climbing out of the crib or his head is above the side bar.

There are convertible cribs that become beds and grow with your child. Inspect your child’s crib to be sure there is nothing that will put your baby at risk. The ornate designs carved into the end boards of cribs are beautiful but could pose a hazard to your child. Have you seen them?

Your child could be injured if his head, arm, or leg get caught in them and possibly sustain an injury. A simpler design may increase your child’s safety. Safety guidelines from 1974 for cribs state that slats should be no more than 2 and 3/8th inches apart; to keep your baby from getting his head caught between the slats.

Your baby’s safety could be compromised if getting stuck caused him injury and necessitating the removal of some slats.

Tags: , , , , , , , , , , , , , , , , , , ,

Related posts

Dec
04

Baby Cribs – Finding The Right One

Posted by admin

Before you go looking at baby cribs you should determine your budget. A good idea is to have a price range to work with. This will allow for more choices in the long run.

The main concern you should have whether you are buying a new crib or a used one. The crib must meet government standards. When you put the crib together be sure to so following the manufacturers directions exactly to ensure the greatest amount of safety for your child. It should also be used properly.

Safety concerns include the mattress. The mattress must be firm and tight fitting and there should be no missing or broken hardware. There should be no missing or loose slats. The slats should not be any more than 2 3/8 inches apart – about the width of a soda can. There should be no cutouts in the foot or headboards. If there are corner posts they should be no more than a sixteenth of an inch above the foot or head bar.

Drop sides on a crib is very convenient and is probably the most used feature on any crib. Fixed sides do not have the drop down feature and is great for tall people or those who will only be occasionally using the crib.
Most parents opt for a single drop down sided crib that allows them to easily lift baby out of the crib and to place him in the crib. This is especially convenient if your crib is placed against the wall. Double drop down sided cribs are a popular option among those parents who have room to place the crib so its not against the wall.

There are several ways in which drop sides can be lowered. There is the knee push lever and all you have to do is lean your knee against the crib side and it will drop. This is convenient if you have your baby in your arms.
The knee push sides may be the most common type available. Another common type is the foot bar. You balance on one foot and push the bar down with the other to lower the side. There is the double trigger drop mechanism. There are levers on both ends of the crib and you need both hands free to use them. You squeeze the triggers and then the side will drop. The problem with this type is that if you have the baby in your arms it will be next to impossible to operate.

The wheels on a crib are a great asset because it makes the crib easier to move to clean under or retrieve dropped toys as well as changing bedding. Make sure the casters are strong and turn easily. If you dont think you will need them you can put them aside in case you change your mind.
There are adjustable mattress heights available on all cribs with the exception of the cheapest models of cribs. The three position option is available and is the wisest choice. Two height position are acceptable. Single height mattress is not a safe choice because as your child grows the mattress should be lowered to prevent him from climbing out of the crib or toppling out of the crib.

You should look at the mattress supports as well. Some have vinyl straps that could wear out and break others have metal bar supports which is a better option. The best option however is a metal spring system where the entire mattress is supported and is the most durable of the three options.

Tags: , , , , , , , , , , , , , , , , ,

Related posts

The crib is where your baby will spend a lot of their time and you want to be sure they are safe. Below are some of the questions (with the answers) that are asked about crib safety. Topics such as mattress position, how to place your baby in the crib, and general safety standards are discussed, as are other issues. If you need further information you can search the Internet and visit baby furniture stores.

Q. Are there safety standards for baby cribs?

Yes there are some very exact standards for your babys crib. In 1974 it was made law that cribs should no longer be painted with lead based paint. It was discovered that the ingestion of lead (from any source) could cause learning disabilities and other difficulties in young children. The slats of the crib must be no more than 2 3/8 inches apart, this is to prevent your baby from getting his body or head stuck between the bars causing injury or strangulation. The side bar should be 26 inches above the mattress when it is in its lowest position. If your child is more than an inch taller than the sidebar it is time to move him into a regular bed.

Q. Are there some hazards in my babys crib that I need to be aware of?

Your mattress must fit snugly in the crib; an ill-fitting mattress could cause your baby to slip between the mattress and the side bar causing suffocation. The mattress height should be able to be adjusted into at least three different levels. When your baby becomes more mobile you will want to put the mattress in the lowest position to prevent your baby from climbing or falling out. The slats should be tight, loose slats could pinch little fingers. Do not put the crib near a window to prevent your baby from possibly falling out or becoming tangled in Venetian blind cords.

Q. What are some historical facts about the crib?

Here is a short chronological time line of crib facts:

1973 – The standard for crib slats was to be no more than 2 3/8th inches apart to prevent your baby from slipping through or getting their head stuck. Also, double latches for drop-down sidebars were to become the norm.

1976 – The standard for cutouts in the crib end panels are presented. The end panels must not have any decorative cutout designs. Children were getting their limbs or heads caught causing serious injury or death.

1978 – Cribs must now be painted with non-toxic finish.

1981 – Two models of cribs with cutouts are recalled.

1988 – A voluntary standard addresses mattress support hardware, failure of glued or bolted connections, drop-side latch failure and loosened teething rails.

1990 – No corner posts or projections can be more than 1/16th of an inch above the drop-side.

1998 – California and Washington mandate that hotel cribs must meet the same standards
set for full-size cribs

1998 – Portable cribs must now meet the same standards as full-sized cribs.

Q. How can I tell when my baby is ready for a regular bed?

When your child stands more than a couple of inches taller than the sidebar with the mattress in the lowest position. If your child is climbing out of the crib, for his safety put him in a regular bed.

Q. How should I put my baby to sleep in his crib?

Place your baby on his back or on his side for sleeping. Use one piece sleepers rather than blankets. Your baby could slip under the blanket and possibly suffocate. Remove all pillows and toys as well, in order to prevent suffocation.

Q. Is it safe to cover my baby with a blanket?

A blanket sleeper will keep your baby sufficiently warm while sleeping. If you absolutely need to use a blanket, tuck it in around the bottom of the mattress. Place your baby with his feet toward the end-panel and the blanket should go no higher than his/her chest.

Q. Is a mesh sided crib safe to use for my baby?

Yes, a mesh crib is safe provided the mesh is less than 1/4 inch in size, smaller than a tiny button on babys clothes. The should be rips, tears, or loose threads. If staples are used to attach the mesh they must not be exposed and the mesh must be securely attached to the top rail and the floor plate.

Q. Can I safely use bumper pads in my babys crib?

While bumper pads are not necessary, they can safely be used. They must be very close the edge of the mattress and properly secured. The bumpers must be flat and not puffy, as your baby could get stuck between the bumper and the mattress and suffocate.

Q. What can I do to keep my babys crib safe?

In order to keep your babys a safe place, you should make sure to all connections are secure and that there are no broken or missing parts. Regularly, check the teething rail for splits or cracks. Make sure the mattress spring support and your crib will withstand your babys increasing mobility. The mattress itself should have no splits, tears, or holes.

Q. How can I tell when its time to lower the mattress?

When your baby becomes more active, when s/he begins to pull himself to a standing position or when he sits up alone it will be time to lower the mattress to prevent your little one from either climbing out or falling out.

Q. Can I hang a mobile over my babys crib?

Mobiles and crib gyms can be used to entertain your baby but when your child is able to get on to their hands and knees or pull themselves up. This will prevent your baby from becoming entangled in them.

In Conclusion

Making sure your babys crib is safe, is an ongoing to task. Proper positioning of the mattress, making sure all connections are secure and that there are no loose slats that could pinch little fingers will help to keep your babys crib a safe place for him to be.
Be sure to place him in the crib on his back or side and dress him in a sleeper rather than using a blanket. Keeping these tips in mind will help keep your baby safe and give you some peace of mind.

Tags: , , , , , , , , , , , , , , , , , , ,

Related posts